Drilling and Flow Calibrating Small Holes Down to One Micron in Diameter

Lenox Laser, Inc. drills and flow calibrates small holes from one micron in diameter to six thousand microns in diameter. After flow calibrating, these orifices have a flow diameter that can be used with simple fomulae to accurately predict flow rates through them for any gas or mixture of gases under various pressure and temperature conditions. The shape of the hole has no bearing on the flow diameter thus has no negative bearing on the degree of flow control accuracy.

Flow calibrated holes have found many customer uses over the last thirteen years. They have replaced many other flow control and measuring devices used by industry. They have proven to be less costly, trouble-free and more accurate in almost all cases. These holes are drilled into many different parts and materials, such as, VCR blind gaskets, tubes with a closed end, closed pipe nipples, set screws, and many other custom shapes. The majority of holes that are drilled are in stainless steel, however, many other materials, such as, plastic, glass, and most metals are also in demand.

Let Lenox Laser help you solve your flow control and other flow related problems in an economical and precise way. For more information and technical support call 410-592-3106 or visit our website at http://www.lenoxlaser.com/

Calibrated Flow for Leak Testing
Lenox Laser Flow Certifications